Skip to content
OXZA
← Stabilizers
LIFT / THREE-QUARTERREVSTAR-ST-L 400-157c · AREA 157 cm² · SPAN 400REVSTAR stabilizer drawn as a lit translucent form, its leading edge glowing cyan, above a dark grid floor, seen from above and to one side with its fuselage mount under it and its reflection below
TOP OUTLINEREVSTAR stabilizer drawn as a lit translucent form, its leading edge glowing cyan, above a dark grid floor, seen head-on with the fuselage mount standing at the centre of the span
FRONT VIEWREVSTAR stabilizer seen edge-on as a lit cyan line above a dark grid floor — a thin section running tip to tip with the fuselage mount at its centre
A STAB ON THE TAIL
A STAB IN HAND

“”

STABILIZER · LIFT

REVSTAR-ST-L 400-157c

Carve tuning on the winglet tip — pairs with the S wings, matches all

$249 USD · DIRECT
Lift S8 connection Area 157 cm² Span 400 mm

KEY SPECS

LineST-L — Lift
Area157 cm²
ConnectionS8
MaterialCF
Span400 mm
Weight—
Best forLift. Support under the 801, 901 and 750s, and the one winglet tip in the range.

RECOMMENDED PAIRINGS

REVSTAR-Z 850-650cFRONTWING
REVSTAR-MX 95MAST
FU700 OX TIFUSE

This is the tail on the recommended Carve setup.

Build this setup

Rider reviews

No reviews yet for the REVSTAR-ST-L 400-157c. Ridden it? Be the first.

Write a review

Pairs with ST-L 400-157c

WING · ALPHAREVSTAR-A 730-650cSpan 730 · AR 8.5 · $1,099WING · ZENITHREVSTAR-Z 850-650cSpan 850 · AR 11 · $1,199STABST-L 400-139sPairs with the 801, 901 and 750s — not the carve wings · $199STABST-L 400-140sPairs with the 801, 901 and 750s — not the carve wings · $199STABST-L 400-145lLift for the 801 and 901 — not the carve wings · $199